WiFi

Configure WiFi settings on your devices.

General


Network Name	The name of the network which the device should connect to. Also is the name of the Wireless Policy.
Auto Join Network	Selecting this will enable the device to auto connect to this network.
Hidden Network	Select whether the network is hidden or not.
Network Priority	Assign priority for which wireless network to connect with when multiple networks are available. If multiple networks are available, the device will choose the network with the lowest priority number.


Security Type	The security protocol currently being used on the network. You can select WEP, WPA/WPA2, Any (Personal), WEP Enterprise, WPA/WPA2 Enterprise, Any (Enterprise) or None.
Password	The password to connect to the network.
Enterprise Settings	If 802.1x Enterprise is selected as the security type, clicking the text box will bring up the Enterprise settings page. See Enterprise Settings below for more information.

Proxy settings are not supported on iOS devices enrolled with user enrollment add devices rules.


Proxy	SOTI MobiControl offers proxies to be automatically configured, or to manually configure them. If automatic is selected, then enter a URL in the URL field. If manual is set, then you must enter data in the Proxy Server, Username, and Password fields.
URL	If automatic is selected as the proxy setting, enter the URL of the proxy here.
Proxy Server	If manual is selected, enter the name of the proxy server here.
Username	If manual is selected, enter the username for authentication here.
Password	If manual is selected, enter the password here.


Mobile Hotspot	Select this option if the network has Hotspot 2.0 enabled.
Domain Name	Domain name of access point which is used in the place of SSID for Hotspot 2.0 access points.
HESSID	Homogeneous Extended Service Set Identifier (HESSID) is used to uniquely identify an access point and is used in for Hotspot 2.0 networks.
Roaming	Enables WiFi roaming on Hotspot 2.0 access point when a partnership between the mobile carrier and the access point provider exists.
Roaming Organization Identifiers	A list of mobile carriers Hotspot 2.0 access points that the device can connect with.
Network Access Identifiers	List of names which are used for negotiating a connection with a Hotspot 2.0 access point.
Mobile Code	Three digit number which is used to negotiate a connection with a Hotspot 2.0 access point.
Display Operator	Display the operator name of the Hotspot 2.0 access point the device is connected to.

When any Enterprise option is selected as the Security type, click on the Enterprise Settings text field to open a pop-up window.

On the Protocols tab, you can select TLS, LEAP, EAP-FAST, TTLS, PEAP and/or EAP-SIM.

On the Authentication tab, you can set the following options:


Username Format	The format which the user name should appear as. You can select UPN, Domain\Username, Username or you can prompt the user or use a static user name.
Username	Enter the user name here. Note: Macros can be used to supply the user name.
Use Per-connection Password	Select this option to request a password for each connection and send with authentication.
Password	Enter the password required for the provided user name.
Use Identity Certificate	When a certificate is imported through the certificate manager, you can select it here. See Certificates for more information.
Phase 2 Authentication	Select the phase 2 authentication protocol you want to use.
Other Identity	Enter an externally visible identification if using TTLS, PEAP, or EAP-FAST.

On the Trust tab, enter the trusted certificates required for authentication.

When you have finished configuring the enterprise settings, click Save and Close to close the pop-up window.